Pump Motor Control Method - Hitachi L-2100 Instruction Manual

Pump Motor Control Method

4.3.2
Automatic flow rate control method (STANDARD) and constant flow rate control method
(FIX) are available as pump motor control methods.
Monitor screen
UTLTY
UTILITY CONDITION=1 UNIT=2 FLUSH=
EVENT 4 LINK= OTHERS=6
Select CONDITION .
CONDITION SET Z-ADJ=1 MOTOR-CTRL=2
2 PURGE=3, CALIBRATION=4
Select MOTOR-CTRL (MOTOR CONTROL).
MOTOR CONTROL: STANDARD=1,
STANDARD
FIX
NOTICE: Select "STANDARD" for Model L-2100/2130 pump.
FIX=2
1
Monitor screen
MOTOR CONTROL is set to STANDARD.
FIX STEP AREA
<0, 30-300> 100
Monitor screen
4 - 22
[--]
Enter a FIX STEP AREA.
Input range is 0, and from 30 to 300.