4.1
Preparatory Operations
4.1.1
Setting of Pump Mode
4.
OPERATION
The method of pump operation using the optional UI pad is
described here.
Explained here is the operating method for using the L-2130
pump.
This section shows how to set the pump in the single-liquid
delivery mode (FLOW mode).
NOTICE: Once this setting is made, it is memorized and need not
be made each time.
<POWER ON> + [(SETUP) UTILITY]
When pressing the [POWER] and [(SETUP) UTILITY]
keys simultaneously, the pump mode setting screen
appears. It may be necessary to continue pressing
[(SETUP) UTILITY] until the setting screen appears.
SETUP PUMP
MODE
A
LOW
[ENTER]
SETUP ITEMS PUMP=1 CONTRAST =2
[1][ENTER]
PUMP A=1 B=2
[1][ENTER]
4 - 1
CONTRAST
S.NO.
4 02AB-111