Lower Limit Switch; Remove And Replace; Motor Centrifugal Switch Assembly - Electrolux EI15TC65HS Technical & Service Manual

30 Section D – Electrical Components

Lower Limit Switch

REMOVE AND REPLACE

This switch sets the lower travel limit for the ram
mechanism.
1. Remove the back panel from the cabinet cover (see
Access to Components, Remove Cabinet Cover).
2. Remove two Phillips head screws and the switch
from the center stabilizer plate.
3. Noting their locations, transfer the wires to the
replacement switch.
4. Install the switch and secure with two Phillips head
screws.
SCREWS
Motor Centrifugal Switch
Assembly
REMOVE AND REPLACE
This switch reverses the motor when peak load is
reached.
1. Remove the control panel assembly from the front of
the unit (see Control Panel Assembly, Remove and
Re-install).
SCREWS
2. Remove two Phillips head screws and the switch
from the bottom of the motor.
3. Noting their locations, transfer the wires to the
replacement switch.
4. Install the switch and secure with two Phillips head
screws.
POWER UNIT
MECHANISM
SWITCH
SCREWS