Wrong Ink Cartridge - Epson Stylus Pro 4000 Field Repair Manual

Stylus Pro 4000 Field Repair Guide
Note: The Wrong Ink Cartridge error indicates that the Printer detects an Ink Cartridge that does not
match the Ink type expected.
1. Verify that the Maintenance Mode 2: Service Config: NPD
2. Reset the Maintenance Mode 2: Service Config: NPD
2.1 Release the Ink Cartridges by raising the Ink Cartridge Release Lever.
2.2 Set the NPD value to 0.
2.3 Turn the Printer on, and lower the Ink Cartridge Release Lever.
2.4 The Printer will look at the Cartridge's ink type and reset the Printer's ink type to match.
3. The CSIC Contacts in the Ink Bay may cause this error.
4. A defective CSIC Chip or incorrect Ink Cartridge can cause the error.
4.5 Use the Maintenance Mode 1: CRTG INFO MENU:

Wrong Ink Cartridge

Wrong Ink Cartridge
Printer Component, Software Item,
value is set to the correct ink type.
value.
to look at the data on the CSIC
LCD Display, Printer Button
4/28/05
Chip.
Page 135.