Epson Stylus Pro 4000 Field Repair Manual page 14

Stylus Pro 4000 Field Repair Guide
6. Carriage Rail Cover (Wheel Track) protection steps.
The Carriage Rail Covers will separate and bend when removing the Print Head if not
1. Make a double wall cardboard jig as shown.
Carriage Removal Procedure
.5" wide, and1/4" deep V slot
2. Place the jig so that the
V slots support the Car-
riage Rail Covers
Note:The jig should be placed
so that it supports the
Carriage Rail Covers
beside to the Print
Head, when it is in the
removal position (see
step 8).
Printer Component, Software Item,
5" long
LCD Display, Printer Button
4/28/05
protected.
1.75" wide
Page 14.