Epson Stylus Pro 4000 Field Repair Manual page 165

Stylus Pro 4000 Field Repair Guide
3. Press and hold the Left, Down, and
4. Using the Down
5. Using the Down
6. The Printer's LCD will display
7. Press the Menu
7.1 The Printer's LCD will display
7.2 The Printer's LCD will display
8. Place a.65mm feeler gauge on the Platen as shown.
1. Slide the Carriage Assembly towards the feeler
gauge.
2. Increase the Platen / Print Head gap by depressing the
Up Arrow
3. Continue to increase the gap until the Print Head clears
the.65mm feeler gauge.
4. Increase the Platen Gap Offset Value be 3 more steps
than determined in step 3.
Platen Gap Adjustment
Up
button, navigate to Self Testing: Adjustment:
button, navigate to ADJ: PG ADJ:
[ENTER]
button to start the procedure.
Detecting
PG Offset *(nn)
Printer Component,
buttons, and turn on the Printer (Maintenance Mode 2).
and press the
Start.
Origin.
(*nn = the current Platen Gap Offset).
Software Item, LCD Display, Printer Button
and press the Menu
Menu button.
4/28/05
button.
Page 165.