Stylus Pro 4000 Field Repair Guide
1. Load 17" Enhanced Matte roll paper.
2. From the
Adjustment Wizard
Multi Sensor Auto PF Adjustment
Multi Sensor Auto PF Adjustment
for the Pro 4000, select the
Printer Component,
Software Item,
Multi Sensor Auto PF Adjustment.
1. Click on Run.
2. The Printer will print a test pattern. (It
takes about 15 minutes). While it is
printing, it is reading the test pattern
with the Multi Sensor and correctly
setting the Feed Length Adjustment.
3. Click on
LCD Display,
Printer Button
Finish
when completed.
4/28/05
Page 154.