Epson Stylus Pro 4000 Field Repair Manual page 9

Stylus Pro 4000 Field Repair Guide
PF Resolution: Initialize OK?
Head Record: Initialize OK?
Wiping Record: Initialize OK?
Rab. Record: Initialize OK?
Waste Record: Initialize OK?
CRmot Record: Initialize OK?
PFmot Record: Initialize OK?
Lever Record: Initialize OK?
Cover Record: Initialize OK?
Ink Lever Record: Initialize OK?
Update: InkParameter: Init. Fill: (Set, Reset)
MntTank: (On, Off)
Mask Type: Dispersion, Regular
PF BiD Adjust: (+/- n)
Uni-D Trap: (On, Off)
Display: Address:
Life: CR Motor, PF Motor, CR+PF Motor, Roller, Roller Rel, D/E Chg, Hopper, ASFLoad, Cutter, Head U/D,
Head Lock, Cleaning, Print, Total Life, CR+PF+Fire, TotalLife2, TotalLife3, Check
of these devices and assemblies)
Service Config
Chg DEVICE-ID: *Sty Pro 4000, PX-6000
NPD: *1, 0, 2 (Defines the ink type (1= pigment, 0 = new/undefined, 2 = dye))
EDMODE: *X, O,N
MD TBL: ID = (1-7D Hex)
View Counters
(Displays the usage/life counter information for the following devices/operations)
Cutter, Cutter Total, Total Pages, Maint Tank, CR Motor, CR Total, PF Motor, Nozzle A, Nozzle B,
Nozzle C, Nozzle D, Nozzle E, Nozzle F, Nozzle G, FL Box, Cleaner, Sponge, ASF, Feed Roller, PG
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Resets this counter only)
(Turn on or off the Maintenance Tank CSIC)
(?)
(?)
(Used for displaying data at specific RAM addresses)
(Used for choosing the Plug and Play printer name)
(X=CSIC used fully, N=Non-USA Cartridges are OK, O=CSIC is disabled)
("Modifying parameter of media table is available")
Printer Component,
(Resets this counter only)
(Resets this counter only)
(Reset, turns off the initial fill)
(?)
Software Item, LCD Display, Printer Button
4/28/05
(Used for design testing
Page 9.