Line Preference - Outgoing (Idle Line / No Line / Prime Line) - Panasonic KX-TD816 Installation Manual

L
Conditions
Programming References
Feature References
Operation References
—User Manual
L
ine Preference – Outgoing (Idle Line / No Line / Prime Line)
Description
Conditions
3-80 Features
• Setting a new line preference feature cancels the previous setting.
• If Prime Line Preference is selected and an incoming call arrives from
a line other than the prime line, it cannot be answered just by going off-
hook. The Prime Line should be assigned to the Single CO button.
• If Ringing Line Preference is selected, going off-hook does not answer
a line programmed for "no ring" even though there is an incoming call.
Going off-hook during the delay time does not answer a line
programmed for "delayed ringing."
• A single line telephone is always set to Ringing Line Preference and
cannot be changed.
Station Programming.......................................................User Manual,
Preferred Line Assignment – Incoming
None
Basic Operation,
Receiving Calls
A proprietary telephone user can select a desired outgoing line
preference to originate calls from the following three line
preferences:
(1) Idle Line Preference:
When you go off-hook, you are connected to an idle line.
An idle line is automatically selected from the pre-assigned
lines.
(2) No Line Preference:
No line is selected when you go off-hook. You must select
a line to make a call.
(3) Prime Line Preference:
When you go off-hook, you are connected to the pre-
assigned line. Assign a line as your prime line beforehand.
• Setting a new line preference feature cancels the previous setting.
• To set Prime Line Preference, one prime line is selected from intercom
or CO lines.
• The CO lines used by users must be connected by programming.
• To select Idle Line Preference, CO lines available for the user should
be programmed. Also CO lines available for Automatic Line Access
should be assigned.
3 Features