Pulse To Tone Conversion; Redial, Automatic - Panasonic KX-TD816 Installation Manual

PR
Conditions
Programming References
Feature References
Operation References
—User Manual
P
ulse to Tone Conversion
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
R
edial, Automatic
Description
3-98 Features
When a two-party call is changed to a three-party call and vice versa, a
confirmation tone is sent to all three parties. Eliminating the tone is
programmable.
Section 4, System Programming,
[990] System Additional Information, Field (13)
Section 3, Features,
Privacy, Automatic
DPT Features,
Privacy Release
This feature allows the extension user to change from pulse dial to
tone (DTMF) dial so that the user can access special services such
as computer-accessed long distance call.
• This feature works only on CO lines set to Pulse Dialing mode or Call
Blocking mode.
• Dial Type Selection provides selection of a dial mode for each CO line.
• This feature is unavailable to DISA* callers.
• Changing tone to pulse is not possible.
Section 4, System Programming,
[402] Dial Mode Selection
Section 3, Features,
Dial Type Selection
DPT Features, SLT Features;

Pulse to Tone Conversion

This is a special feature for the proprietary telephones, that
provides automatic redialing of the last dialed, saved number or
call log, if the called party is busy. If the Last Number Redial,
Saved Number Redial or Call Log operation is performed
handsfree, the telephone set will hang up and try again after a pre-
determined period of time.
3 Features
*: Available for KX-TD1232 only.