Panasonic KX-TD816 Installation Manual page 262

4.2 Manager Programming
System Speed Dialing Number Set
Feature References
– To store a pause, press PAUSE.
(Refer to Section 3 "Pause Insertion, Automatic.")
– To store the feature number to convert pulse signals to DTMF
signals, press the
(Refer to Section 3 "Pulse to Tone Conversion.")
– To prevent the display of all or part of the number, press SECRET
before and after confidential parts of the number. The SECRET
button must always be entered in a pair. Or your entry is not
stored. (Refer to Section 3 "Secret Dialing.")
• If you are storing an external number, include the line access code
(default=9/0, 81 through 88) before the number. When dialing, pause is
automatically inserted after the code.
• If you are storing an account code, enter the account code before the
line access code.
(Refer to Section 3 "Account Code Entry.")
• It is possible to store a number consisting of 25 digits or more by
storing it in two speed dial numbers. A line access code should not be
stored in the second speed dial number.
• To go to another speed dial number at steps 3 through 6, press
SELECT and start with step 3.
• To display parts of the number which have scrolled off the display,
→ ←
press or .
• Program [002] "System Speed Dialing Name Set" is used to give names
to speed dial numbers.
Section 3, Features,
Special Features for KX-T7235 — System Speed Dialing
System Speed Dialing
(contd.)
# keys.
System Programming
001
4-17