Caller Id Assignment - Panasonic KX-TD816 Installation Manual

4.5 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References
: Available for KX-TD816C/1232C and
*
KX-TD816HK/1232HK only.

Caller ID Assignment*

Enables Caller ID feature for the CO lines to which Caller ID
Service is offered by a Central Office by contract.
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
• Enable / Disable
All CO lines – Disable
1. Enter 406.
Display : Caller ID Asn
2. Press NEXT.
Display: CO Line NO?—>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• To assign all CO lines to one selection, press the
this case, the display shows the contents programmed for CO01.
• The following programs are used to program Caller ID feature: [110]
"Caller ID Code Set" and [111] "Caller ID Name Set."
Section 3, Features,
Caller ID
( =all CO lines)
( =all CO lines)
key at step 3. In
System Programming
406
4-83