Panasonic KX-TD816 Installation Manual page 290

4.3 System Programming
Conditions
Feature References
VM Status DTMF Set
3. Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
4. Press STORE.
5. To program another selection, keep pressing NEXT or PREV
until the desired selection is displayed.
6. Repeat steps 3 through 5.
7. Press END.
• A DTMF signal number can have a maximum of three digits, consisting
of 0 through 9, , # and PAUSE.
• The DTMF signals are sent to the extensions in the extension group that
is assigned as "VM" or "AA" in program [106] "Station Hunting
Type."
Section 3, Features,
Voice Mail Integration
(contd.)
System Programming
113
4-45