Cos Additional Information - Panasonic KX-TD816 Installation Manual

4.10 Option Programming
Description
Field number
Selection
Default
Programming

COS Additional Information

(1) Sets the number of digits allowed to dial out during a CO call on a
Class of Service (COS) basis. If an outside party hangs up and the
extension user tries to dial out still on the CO line, the system will
disconnects the line at the time the assigned digits are dialed. This
program can be added if CPC Signal Detection is not provided by
the CO.
The Field (1) shown below is used to enter your selection.
(2) Enables or disables the Call Forwarding – Follow Me feature on a
COS basis.
The Field (2) below is used to enter your selection.
Display
1111111111110000
example
• COS number: 1 through 8,
• Field number : 1 or 2
• Selection for field (1):
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
1000: 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for field (2): 0 : disable / 1 : enable
Field 1: All COS – 0000 / Field 2: All COS – 1
1. Enter 991.
Display: COS Add Inf.
2. Press NEXT.
Display: COS NO?->
3. Enter a COS number.
Display example: 1111111111110000
Keep pressing ←
4.
↓
(unused)
( =all COS)
→ to move the cursor to the desired field.
or
System Programming
991
↓ ↓
(2) (1)
4-131