Forwarding Database Commands - D-Link DES-1228/ME Reference Manual

The Layer 2 Forwarding Database commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table:
Command
create fdb
create multicast_fdb
config multicast_fdb
config fdb aging_time
delete fdb
clear fdb
show multicast_fdb
show fdb
config multicast
port_filtering_mode
show multicast
port_filtering_mode
Each command is listed, in detail, in the following sections:
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
F
ORWARDING
Parameters
<vlan_name 32> <macaddr> port <port>
<vlan_name 32> <macaddr>
<vlan_name 32> <macaddr> [add | delete] <portlist>
<sec 10-1000000>
<vlan_name 32> <macaddr>
[vlan <vlan_name 32> | port <port> | all]
{vlan <vlan_name 32> | mac_address <macaddr>}
{port <port> | vlan <vlan_name 32> | vlanid <vidlist> | mac_address
<macaddr> | static | aging_time}
[<portlist> | all] [forward_unregistered_groups |
filter_unregistered_groups]
D
ATABASE
121
12
C
OMMANDS