D-Link DES-1228/ME Reference Manual page 72

To disable SNMP linkchange trap support on the Switch::
DES-1228/ME:5# disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DES-1228/ME:5#
config snmp linkchange_traps ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure SNMP linkchange traps for ports 1 to 4:
DES-1228/ME:5#config snmp linkchange_traps ports 1-4 enable
Command: config snmp linkchange_traps ports 1-4 enable
Success.
DES-1228/ME:5#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to configure the sending of linkchange traps and per port
control for sending of change traps.
config snmp linkchange_traps ports [all | <portlist>] [enable | disable]
This command is used to configure the sending of linkchange traps
and per port control for the sending of change traps.
all – To specify all ports.
<portlist> - To specify a port range.
enable – To enable the sending of a link change trap for this port.
disable - To disable the sending of a link change trap for this port.
Only Administrator level or Operator level users can issue this
command.
Used to show SNMP trap support on the Switch.
show snmp traps {linkchange_traps { ports <portlist>} }
This command is used to view the SNMP trap support status
currently configured on the Switch.
linkchange_traps – This displays the current SNMP linkchange trap
status.
<portlist> – This specifies a list of ports to display SNMP trap
support.
None.
68