D-Link DES-1228/ME Reference Manual page 43

show ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of all ports on a standalone switch:
DES-1228/ME:5#show ports
Command: show ports
Port State/
MDI
----- --------
1 Enabled
Auto
2 Enabled
Auto
3 Enabled
Auto
4 Enabled
Auto
5 Enabled
Auto
6 Enabled
Auto
7 Enabled
Auto
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the current configuration of a range of ports.
show ports {<portlist>} {[description | err_disabled]}
This command is used to display the current configurations of a range of ports. No
parameters will show all ports.
<portlist> − Specifies a port or range of ports to be displayed.
description – Adding this parameter to the show ports command indicates that a
previously entered port description will be included in the display.
err_disabled – Use this to list disabled ports including connection status and
reason for being disabled.
None.
Settings
Speed/Duplex/FlowCtrl
---------------------
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Connection
Speed/Duplex/FlowCtrl
---------------------
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
LinkDown
39
Address
Learning
--------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled