D-Link DES-1228/ME Reference Manual page 25

enable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable Telnet and configure port number:
ES-1228/ME:5#enable telnet
Command: enable telnet
Success.
DES-1228/ME:5#
disable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Telnet protocol on the Switch:
DES-1228/ME:5#disable telnet
Command: disable telnet
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to enable communication with and management of the Switch
using the Telnet protocol.
enable telnet {<tcp_port_number 1-65535>}
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP port number the Switch will use to
listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" TCP port for
the Telnet protocol is 23.
Only Administrator level and Operator level users can issue this
command.
Used to disable the Telnet protocol on the Switch.
disable telnet
This command is used to disable the Telnet protocol on the Switch.
None.
Only Administrator level and Operator level users can issue this
command.
21