D-Link DES-1228/ME Reference Manual page 29

To save the Switch's the current configuration and log to non-volatile RAM:
DES-1228/ME:5#save all
Command: save all
Saving all configurations and log information to NV-RAM...... Done.
Success.
DES-1228/ME:5#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DES-1228/ME:5#reboot
Command: reboot
Are you sure you want to proceed with the system reboot?(y/n) y
Please wait, the switch is rebooting...
To force the Switch to restart:
DES-1228/ME:5#reboot force_agree
Command: reboot force_agree
Please wait, the switch is rebooting...
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to restart the Switch.
reboot {force_agree}
This command is used to restart the Switch.
force_agree – When force_agree is specified, the Switch will be
forced to restart immediately without further confirmation.
Only Administrator level users can issue this command.
25