(4)
Take off the bypass separation pad while
pinching the mounting bracket.
Note:
When the separation pad is replaced, apply
one grain of rice-sized white grease to the
supporting point.
[D] Bypass roller unit
(1)
Take off the bypass unit.
P.10-10 "[A] Bypass unit"
(2)
Remove 2 screws, and take off the cover.
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
Bypass separation pad
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
10 - 12
Bypass separation pad
Fig. 10-12
White grease
Fig. 10-13
Cover
Fig. 10-14