Toshiba e-STUDIO167 Service Manual page 75

• When paper becomes almost empty as they fed out during copying,
Æ The tray-up sensor is turned OFF.
Æ The tray-up motor is turned ON – the tray is raised.
Æ The tray-up sensor is turned ON.
Æ The tray-up motor is stopped.
• When the paper empty sensor is turned OFF even if the tray-up sensor is ON during copying,
È
The sensor is detecting that no paper exists.
È
The lamp on the control panel corresponding to the drawer blinks (When the drawer is
selected)
È
Copying is stopped
(B) Pick-up failure in bypass
• During bypass feeding
Bypass pickup solenoid ON
È
Registration sensor is not turned ON in a fixed period of time
È
"Misfeed in bypass" is displayed : E12
È
Copying operation is disabled
È
Solution: The bypass paper sensor is turned OFF by removing the paper from the bypass tray.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
4 - 7
e-STUDIO167/207/237
GENERAL OPERATION
4