Toshiba e-STUDIO167 Service Manual page 249

[B] ADU driving PC board (ADU)
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Disconnect 2 connectors, release the latch
and take off the ADU driving PC board.
[C] ADU motor (M8)
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Disconnect 1 connector, remove 2 screws
and take off the ADU motor with the bracket.
(3) Remove the gear.
(4) Remove 2 screws and take off the ADU
motor.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
Latch
Fig. 14-11
Connector
ADU motor
Fig. 14-12
Gear
Fig. 14-13
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
14 - 13
ADU driving PC board
Bracket
ADU motor
e-STUDIO167/207/237
14