[C] Exit roller
(1)
Take off the fuser roller unit.
P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2)
Release the latch and take off the gear-A.
(3)
Take off the gear-B.
(4)
Remove the bracket.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
Gear-A
Fig. 13-9
Gear-B
Fig. 13-10
Bracket
Fig. 13-11
13 - 13
e-STUDIO167/207/237
FUSER / EXIT UNIT
13