Ipedge Configuration - Toshiba IP edge EP Installation Manual

Hide thumbs Also See for IP edge EP:
Table of Contents

Advertisement

IPedge CONFIGURATION

IPedge CONFIGURATION
12-16
10. Select Protocol Configuration > Routing Tables > Tel To Ip
Routing
Src Trunk Group = *
Dest Phone Prefix = *
Source phone Prefix = *
Dest IP Address = 192.168.254.254 (IP address of the IPedge server)
11. Select Protocol Configuration > Routing Tables > IP To Trunk
Group Routing
Dest Host Prefix = *
Source Host Prefix = *
Dest Phone Prefix = *
Source phone Prefix = *
Source IP address = *
Trunk Group = 1
IP Profile ID = 0
Source IP Group ID = -1
This section is the IPedge configuration.
1. Set up Trunk ILG
2. Set Trunk OLG
3. Set the Channel Group
4. Set the Service definition
5. Point the SIP server IP address to the Audio codes.
6. Set service assignments.
7. Set URI's for each of the Audiocodes AUTO DIAL number
programed.
8. Set DID or DID intercepts.
9. Select Station > Station Assignment
In the Basic tab set:
Network Calling Number = 10 digit number to be sent out on the SIP
trunk. This 10 digit number must be in the SIP Trunking URI table as
a Main URI, and either registered or valid number.
Trunk Protocol and Configuration
Installation Manual
August, 2011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip edge emIp edge ec

Table of Contents