Removing The Main Top (Smooth Top Models) - Electrolux 30" Service Manual

Removing the main top: (Coil element models)
1. Disconnect power, remove the elements and drip
pan.
2. Disconnect the terminal blocks and remove the lift
and lock rods.
3. Raise the front of the main top and push the main
top hinge bracket toward the side of the range to
disengage the hinge pin. Pull forward and to the
side on the top and slide the other hinge pin out of
it’s bracket. Disconnect the ground wire and remove
the top.
Hinge bracket
Removing the main top: (smooth top models)
1. Disconnect power, and raise the front of the top.
2. Remove the element bars and drop the elements
down.
3. Push the main top hinge bracket toward the side of
the range to disengage the hinge pin. Pull forward
and to the side on the top and slide the other hinge
pin out of it’s bracket. Disconnect the ground wire
and remove the top.
Hinge bracket
Removing the lock rod: (self clean models)
1. Raise the front of the main top and remove the screw
holding the rod to the spring and sleeve. Pull the rod
out the front of the range.
One screw
Removing the main top hinge:
1. Disconnect power, disengage the lift and lock rods
(Coil models), disconnect the hinge from the hinge
plate and pull the top forward.
2. Remove the two screws holding the hinge to the
flange of the main top.
108