Electrolux 30" Service Manual page 6

Oven door does not lock when the oven is
programmed for clean
Oven door locks when the oven is programmed
for clean but the oven does not heat
Lock motor runs continuously
Door latch is partly closed with door open,
cannot close door
Sample schematic for ES 200 control system
The ES 300 electronic oven control system
How to program the ES 300
For a silent control panel
Temperature conversion
To change the temperature from °F to °C or from °C to °F
To set the clock
To set the minute timer
To change the minute timer while it is in use
To cancel the minute timer before the set time has run out
To set or change the temperature for baking
To set the controls for baking
To change the oven temperature after baking has started
To set control for continuous bake or 12 hour energy saving
To set control for continuous baking
To set control for oven lockout feature
To set the timed bake feature
To program the oven to begin baking
immediately and to shut off automatically
To program oven for a delayed start time
and to shut-off automatically
To change the oven temperature or bake
time after baking has started
Speed Bake
General cooking instructions
To set Speed Bake™ cooking system
To broil
Self-cleaning oven
Adhere to the following cleaning precautions
To set the controls for a self-clean cycle
When the self-clean cycle is completed
Stopping or interrupting a self-cleaning cycle
How the ES 300 control system works
Bake
Time bake
Broil
Speed bake
Clean
Calibration
To check oven calibration
To change the calibration
Troubleshooting
F1 code
F3 code
F9 code
Control will not program
Time bake does not operate
If the control appears to be operating
normally, the bake element heats, but
the broil element does not heat
6
49
49
49
50
50
51
52 - 60
52
52
52
52
52
52
53
53
53
53
53
53
53
53
53
53
53
54
54
54
54
54
55
55
55
56
56
56
56
56
57
57
57
57
57
57
57
57
57
58
58
58
58