Panasonic UF-9000 Service Manual page 159

No.
19 Scanner Count
20 Scanner Read Count
21 Copy Print Count
22 Copy Scan Count
23 PC Print Count
24 PC Scan Count
25 Fax Transmit Count
26 Fax Receive Count
27 Fax Print Count
28-29 Not Used
30 A4R / LETTER R Count
31 Not Used
32 FLS / LEGAL Count
99 All Counter Clear
5.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press "V", "/\" arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press "SET" key.
↓
Press "STOP" key, then press "FUNCTION" and "CLEAR" keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
No.
00-05 Not Used
06 Error Log View
07 Error Log Clear
08 (Factory use only)
09-17 Not Used
18 C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)
Ver. 3.0
F7 Mode
Item
F8 Mode
Item
Total count of scanning operations.
Total count of scanner readings.
Total count of copies printed.
Total count of copies scanned.
Total count printed from PC.
Total count scanned to PC.
Total count of Fax transmitted.
Total count of Fax received.
Total count of Fax printed.
Total count of A4-R / Letter-R Print.
Total count of FLS / Legal Print.
All counters are cleared.
a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
Lock operation for Scanner Unit.
Print out the Test Pattern.
Proceed when the LSU is replaced.
159
UF-9000
DP-180/190
Remarks
Remarks
APR 2006