Ver. 3.0 - Panasonic UF-9000 Service Manual

6.3.6. Paper Ejection and Paper Switchback
A. Normal Printing Mode (Not Duplex Mode)
After fusing, paper is fed to the output tray by the Upper Exit Roller and Upper Exit Pinch Roller. The Paper
Exit/ADU Paper Jam Sensor detects paper. If paper does not arrive at the sensor within a predetermined
period of time, "Jam at A" is displayed, and if paper remains at the sensor beyond a predetermined period,
"Jam at B" is displayed on the computer screen. Paper is ejected face down and stored in the output tray.
B. Duplex Mode
After fusing, paper is fed to the output tray by the Upper Exit Roller and Upper Exit Pinch Roller. The Paper
Exit/ADU Paper Jam Sensor detects paper. If paper does not arrive at the sensor within a predetermined
period of time, "Jam at A" is displayed on the computer screen. At the specified time after the sensor
detects the bottom of paper, the Exit Roller rotates in reverse direction, turning ON the Exit solenoid to
move the ratchet lever to Duplex Position. As a result, the paper is fed to the development area through the
Auto Duplex Unit (ADU). If paper remains at the sensor beyond a predetermined period, "Jam at E" is
displayed. Paper is ejected face down and stored in the output tray.

Ver. 3.0

202
UF-9000
DP-180/190
APR 2006