Panasonic UF-9000 Service Manual page 280

Ver. 3.0
(26) Reinstall the SC Cover.
(27) Secure the SC Cover with 7 Screws.
Note:
Tuck the Ferrite Core into the SC Cover as
illustrated.
(28) Install 2 Harness Clamps (Small), and Edge
Saddle.
(29) Connect the DC Harness to CN141 connector
on the DC PC Board, and route the Harness
through a hole on the side of the machine.
(30) Secure the DC Harness with the Harness
Clamps.
(31) Connect the DC Harness to the LVPS.
280
UF-9000
DP-180/190
APR 2006