Panasonic UF-9000 Service Manual page 52

Ver. 3.0
(14) Remove the CCD Harness Seal (213).
(15) Remove 2 Screws (H8).
(16) Remove the Seal Plate (227).
(17) Disconnect the Flat Harness (1922).
Note:
There is no need to disconnect the front FG
Harness that is attached to the CCD Unit.
Note:
The FG Harness is used on the UF-9000/DP-190
only.
(18) Remove 3 Screws (V7) and 2 Screws (H8).
(19) Remove the Main Board Cover (216).
(20) Disconnect all the Harnesses.
(21) Remove 4 Screws (H8).
(22) Remove SPC PC Board (1910).
52
UF-9000
DP-180/190
APR 2006