Ver. 3.0 - Panasonic UF-9000 Service Manual

Ver. 3.0

(14) Remove the Caution Label covering the AC
Inlet on the machine.
(15) Plug the AC Power Cord.
(16) Connect one end of the Line Cable (Telephone)
to the LINE Jack on the back side of the
machine, and the other end to the Telephone
Jack on the wall.
(17) If required, connect the LAN / USB Cable
(not included).
(18) Turn the Power Switch on the Left Side of the
machine to the ON position and confirm that the
Scanner is unlocked and moves freely.
Note:
Perform the following adjustments after the
machine has warmed up and displays:
<For USA / Canada etc> Skip to Step (23)
READY TO COPY
COPIES:001
<For Europe and Other Destinations only>
DP-180 (**) ***
DESTINATION CODE :
PRESS \/ /\ TO SELECT
Note:
The (**) *** in the LCD display above may differ
depending on the destination.
(19) Press "V" or "/\" arrow keys to select the desired
destination.
(20) Press the "SET" key.
(21) Press the "1" key for YES.
After the machine has warmed up, it displays:
READY TO COPY
COPIES:001
(22) Turn the Power Switch on the Left side of the
machine to the OFF position, and back to the ON
position.
261
UF-9000
DP-180/190
APR 2006