Installing The Handset Kit (Ue-403171/Ue-403172) - Panasonic UF-9000 Service Manual

8.9.

Installing the Handset Kit (UE-403171/UE-403172)

8.9.1. Contents
Qty.
1 Cradle Assembly
1 Handset
1 Handset Cord
1 Installation Instructions
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.9.2. Installation
CAUTION!
Turn the Power Switch on the Left Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Ver. 3.0
Description
(1) Hook the projections of the Cradle Assembly
(2) Connect the Handset Cord to the Cradle
(3) Fasten the Cradle Assembly Cable onto the
(4) Remove the Protective Tab covering the
(5) Connect the Cradle Assembly Cord.
(6) Plug the AC Power Cord, and turn the Power
(7) Reconnect the Telephone Line Cable if it was
293
Part No.
See Note
See Note
DZFN000060
DZSM000254 This document
into the holes on the Left Cover.
Assembly, and the Handset as illustrated.
Hooks on the Rear Cover as illustrated.
HANDSET Jack on the Rear Cover.
Switch on the Left Side of the machine to the ON
position.
disconnected.
UF-9000
DP180/190
Remarks
APR 2006