Kenwood CKBU 300 Instructions For Use Manual page 16

SETTING TIME OF DAY
The programmer is provided with an
electronic clock with luminous figures
showing the hour and minutes.
The first time the oven is connected up
to the electricity supply and after a
power cut, three zeroes will flash on the
programmer display.
To adjust the time, the two buttons
must be pressed simultaneously
and then the button
correct time is set.
Setting speed automatically increases if
you keep the setting buttons pressed.
Fig. 4.2
16
(fig. 4.2)
or until the
MANUAL OPERATION
To use the oven manually, i.e. without
the programmer, you must cancel the
flashing A by pressing the two buttons
simultaneously (the letter A will
go out and the symbol
on).
CANCELLING A PROGRAMME
If the letter A is not flashing (which
means that a cooking program has
already been set) by pressing the two
buttons simultaneously you will
cancel the program and switch to
manual.
If the oven is on, you must switch it
off manually.
Fig. 4.3
will come