Kenwood CKBU 300 Instructions For Use Manual page 18

SEMI - AUTOMATIC COOKING
This automatically switches the oven off
after the required cooking time. There
are two methods of semi-automatic
cooking:
1° METHOD: Programming the cook-
ing time (Fig. 4.6)
– Set the cooking time by pressing but-
ton and then button
forward or
have gone beyond the required time.
The letter A and the symbol
appear.
2° METHOD: Programming the end of
cooking time (Fig. 4.7)
– Set the end of cooking time by press-
ing button
move forward or
you have gone beyond the required
time.
The letter A and the symbol
appear.
Having programmed according to one
of the above methods, set the tempera-
ture and function via the function selec-
tor and thermostat knob (see specific
chapters).
A
Fig. 4.6
18
to move
to move back if you
and then button
to move back if
The oven will come on immediately and
when the set time or programmed end of
cooking time expires, it will automatically
switch off.
During cooking the letter A and the sym-
bol
display the remaining time until end of
cooking or press button
the end of cooking time.
The cooking program can be cancelled
at any time by pressing the two buttons
At the end of cooking, turn the oven
will
knob to the off position the
will go out. The letter A will flash and the
acoustic signal will come on - this can
be switched off by pressing any of the
buttons.
Reset the function selector and thermo-
stat knob and set the programmer to
manual by pressing the two buttons
simultaneously.
to
Important: Also if oven is turned off
automatically by the programmer,
remember to turn to the off position the
will
function selector and the thermostat
knob. If not, when pressing two buttons
the oven will start to operate.
Remember to press the two buttons
simultaneously to be able to use the
oven in manual setting.
Fig. 4.7
remains on; press button
simultaneously.
simultaneously for manual use,
A
to
to display
symbol