Kenwood CKBU 300 Instructions For Use Manual page 22

REPLACING THE OVEN LIGHT
Before any maintenance is started
involving electrical parts of the appli-
ance, it must be disconnected from the
power supply.
– Let the oven cavity and the heating
elements cool down;
– Switch off the electrical supply;
– Unscrew the protective cover (fig. 5.3);
– Unscrew and replace the bulb with a
new one suitable for high tempera-
tures (300°C) having the following
specifications: 230-240V 50 Hz, 15W,
E14
– Refit the protective cover
NOTE: Oven bulb replacement is not
covered by your guarantee
22
Fig. 5.3
2
1