Ornamental Washers - Sony HDW-F500 Maintenance Manual

1-6. Installation of HDW-F500
<Mounting on the rack>
c
This mounting work must be carried out by more than
2 persons.
(17)Slide the ball retainers of the intermediate rails on both
the left and right sides towards you.
Ball retainer
(18)Pull the left and right intermediate rails out for the
equal length.
(19)Lift up the unit holding the handles, and insert the
inner rails into the intermediate rails slowly.
(20)While pressing the left and right stoppers, push the
unit into the rack slowly.
n
Be careful not to catch you finger or hand in the rack
mount rail.
Stopper
Inner rail
1-18
Intermediate rail
Intermediate rail
Stopper
(21)Insert and pull out the unit from the rack three times,
and check that the slide rail moves smoothly.
If the slide rail does not move smoothly, remove the
unit, and repeat from "Attachment of outer rails"
(procedure 12).
c
This removal work must be performed by more
than two persons.
n
As the unit will not have feet attached at this point,
when removing the unit from the rack, handle it
carefully and do not subject it to shock.
(22)Secure the unit to the rack using the two screws and
two ornamental washers.
Tightening torque: 1.2 N . m {12.2 kgf . cm}
Ornamental washer
RK5 x 14
RK5 x 14
Ornamental washer
HDW-F500E MMP1