1-7. Installation of Optional Boards
6. Connect the coaxial harnesses P1 to OUT1 and P2 to OUT2 respectively.
7. Insert the protrusion of the board retainer (S) in the square hole of the chassis, and then secure the
board retainer (S) by tightening screw.
8. Perform "Settings and Checks after Installation".
9. Install the upper lid.
P2
P1
Eject lever
S1
Eject lever
A
Sub harness (PD-MD)
CN2
to CN103 / Motherboard
to CN102 / Motherboard
1-23
HDW-F500E MMP1