UNIVERGE SV8100
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional
Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
Input Data
Item
No.
Programming Manual
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
The number of each code (01~59).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing 705 (code 05) cancels a previously set
Camp-On.
Programs that may be affected with the changing the code.
01
Bypass Call
Activating Call Forwarding/Do Not Disturb Override.
This code is available only if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
02
Conference
03
Override (Off-Hook Signaling)
04
Set Camp-On
05
Cancel Camp-On
06
Switching of Voice Call and Signal Call
07
Step Call
08
Barge-In
09
Change to STG (Department Group) All Ring
10
Station Speed Dialing
Item
Terminals
Default
MLT, SLT
707
MLT, SLT
# 1
MLT, SLT
709
MLT, SLT
750
MLT, SLT
770
MLT, SLT
712
MLT, SLT
708
MLT, SLT
710
MLT, SLT
No
Setting
# 2
MLT, SLT
Issue 1.0
Related
Program
11-16-09
16-02
2 - 97