Service Code Setup, Administrative (For Special Access) - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100

11-15 : Service Code Setup, Administrative (for Special Access)

Level:
IN
Description
Use Program 11-15 : Service Code Setup, Administrative (for Special Access) to
customize the special access Service Codes which are used by the administrator in
the Hotel/Motel feature. You can customize additional Service Codes in Programs
11-10 ~ 11-14 and 11-16.
The following chart shows:
Input Data
Item
No.
Programming Manual
Program 11 : System Numbering
The number of each code (01~14).
The function of the Service Code.
What type of telephones can use the Service Code.
The default entry.
Programs that may be affected when changing the code.
01
Remote Maintenance
02 ACD Access in Dial-In Conversion Table
03 Backup Data Save
This option saves the user's soft key settings
(extension programmed Call Forwards, DND, etc.).
This feature should be used before upgrading the
system software.
04
--- Not Used ---
05 System Programming Mode, Log-On
06
Wake on LAN to APSU Unit
07
--- Not Used ---
08 Network Message Lamp Control
Item Terminals Default
730
760
# # 9
MLT
# #
MLT
MLT No
Setting
766
Issue 1.0
Related
Program
22-04
22-11
11-01
10-22
2 - 105