Netlink System Individual Setting - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 51-02 : NetLink System Individual Setting to set system data for
each NetLink system.
Input Data
Programming Manual

51-02 : NetLink System Individual Setting

Program 51-02-03 is not used in US, but is used in other countries.
System ID
Item
Item
No.
01 System Name
This is the name given to each system.
02 Time Zone (Hour)
Determines the time offset from the
Primary system.
(0 = -12, 1 = -11, 2 = -10.... 12 = 0
13 = +1, 14 = +2, 24 = +12)
This setting affects Time Display on MLT
(see 51-13-02).
03
Time Zone (Minute)
Determines the time offset from the
Primary system.
(0 = -60, 1 = -59, 2 = -58.... 120 = +60)
This setting affects Time Display on MLT
(see 51-13-02).
This PRG is not used in the US, but is
used in other countries.
04 Authenticate System MAC Address
To use this function, set PRG 51-13-03 to
1 (enable), NetLink systems will reject the
connection from unauthenticated system
access.
Program 51 : NetLink Service
Input Data
Up to 20 characters.
0~24
0~120
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
Issue 1.0
1~50
Default
blank
12
60
00-00-00-00-00-00
2 - 563