NEC Univerge SV8100 Programming Manual page 254

Issue 1.0
Item
No.
09
10
11
12
13
14
15
16
17
19
20
2 - 214
Item
Hotline/Extension Ringdown
Turns off or on Ringdown Extension for
extensions with this COS.
Signal/Voice Call
Turns off or on an extension allowing it to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
Protect for the Call Mode Switching from
Caller
(Internal Call)
Department Group Step Calling
Turns off or on an extension to use Department
Group Step Calling.
ISDN CLIP
Determines if the ISDN calling line identity
presentation and screening indicators are
allowed.
Call Address Information
Block Outgoing Caller ID
Turns off or on the system ability to
automatically block outgoing Caller ID
information when a user places a call.
If this option is on, the system automatically
inserts the Caller ID block code (defined in
Program 14-01-21) before the user-dialed digits.
Display E911 Dialed Extension Name and
Number
Turns off or on an extension to display the name
and number of the extension that dialed 911.
ARS Override of Trunk Access Map
Turns off or on an extension ability to override
the trunk access map programming for outgoing
calls.
Hotline for SPK
The ability of an extension to have Hotline
activated or deactivated when going off hook via
the speaker key.
Hot Key Pad
The ability of an extension to make a call by just
dialing the number without first going off hook.
UNIVERGE SV8100
Default
Input
Data
COS COS
01-14 15
0 = Off 0 0
1 = On
0 = Off
1 = On
1 1
0 = Off
0 0
1 = On
0 = Off
1 1
1 = On
0 = Off
1 = On
0 0
0 = Off
0 0
1 = On
0 = Off
1 = On
0 0
0 = Off
1 = On
0 0
0 = Off
1 = On
0 0
0 = Off
1 = On
0 0
0 = Off
0 0
1 = On
Program 20 : System Option Setup
Related
Program
10-03-05
15-01-04
14-01-20
14-01-21
20-08-09