External Speaker Control - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the
external speaker using an amplifier.
Input Data
Item
Programming Manual
External Speaker Number
Item
No.
01 Broadcast Splash Tone Before
Paging (Paging Start Tone)
Use this option to enable or
disable splash tone before Paging
over an external zone. If enabled,
the system broadcasts a splash
tone before the External Paging
announcement.
02
Broadcast Splash Tone After
Paging (Paging End Time)
Use this option to enable or
disable splash tone after Paging
over an external zone. If enabled,
the system broadcasts a splash
tone at the end of an External
Paging announcement.
03
Speech Path
Determine if the external speaker
will be used for talkback (As this
option is not available with the
CD-CP00-US external page zone,
speaker 9 should be left at 1).
04 CODEC Transmit Gain Setup
05
CODEC Receive Gain Setup
Program 31 : Paging Setup

31-06 : External Speaker Control

Input Data
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = Both Way (Duplex)
1 = One Way (PGD(2)-U10 ADP
SPK) (Simplex)
1~63 (-15.5 ~ +15.5dB)
1~63 (-15.5 ~ +15.5dB)
Issue 1.0
1~9
Default
2
2
1
32
32
2 - 381