NEC Univerge SV8100 Programming Manual page 530

Issue 1.0 UNIVERGE SV8100
Input Data
Item
Item Input Data Default
No.
08 Delay in Dialing Digital Pager 0~99 (sec) 9
Callback Number
(Pager Dial Delay)
Use this option to set the delay
(0~99 seconds) that occurs just
before VM8000 InMail dials the
Digital Pager Callback Number
portion of the Message
Notification callout number for a
digital pager. Set this delay so
the pager service has enough
time to connect to the digital
pager before sending the
callback number. Your pager
service may be able to help you
determine the best value for this
option (0~99 seconds). By
default, this option is 9 seconds.
When placing a digital pager
notification, the system:
Seizes the trunk specified.
Dials the user-entered
notification number (in Message
+ OP + N).
Waits the 47-01-08: Delay in
Dialing Digital Pager Callback
Number interval.
Dials the number entered in
47-01-07: Digital Pager
Callback Number.
The system assumes that the
notification number completes
dialing approximately 4 seconds
after trunk seizure. This means
that, by default, the Digital Pager
Callback Number is dialed into
the pager service about 13
seconds after trunk seizure.
2 - 490 Program 47 : InMail