Operator Extension - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
Use Program 20-17 : Operator Extension to designate an operator. When an
extension user dials 0 or 9 (defined by Program 11-01 Type 5), calls go to the operator
selected in this program.
If you do not assign an extension in Program 90-11-01, system alarms appear on the
extension assigned in this option.
Input Data
Item
No.
01
Feature Cross Reference
2 - 236
Program 20 : System Option Setup
Operator Number
Item
Operator's Extension Number
Define the extension numbers which are
to be used by operators.
Conditions
None
Intercom

20-17 : Operator Extension

1~8
Input Data
Up to eight digits
Program 20 : System Option Setup
UNIVERGE SV8100
Related
Default
Program
101 11-01
20-01-01