System Options For Single Line Telephones - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
Use Program 20-03 : System Options for Single Line Telephones to set up
various options for single line telephones.
Input Data
Item
No.
01
02
03
2 - 206
Program 20 : System Option Setup

20-03 : System Options for Single Line Telephones

Item
SLT Call Waiting Answer Mode
For a busy single line (500/2500 type)
telephone, set the mode used to answer a
camped-on trunk call.
Ignore Received DP Dial on DTMF SLT Port
Use this option to define whether the system
should receive dial pulse and DTMF signals
(0) or ignore dial pulse and only accept DTMF
signals (1).
SLT DTMF Dial to Trunk Lines
Type 0: The system keeps the digits
dialed by the single line telephone on a
trunk in a buffer. After all the digits are
received, the system sends all the digits
to the trunk. If the time space between
digits is longer than the time in Item 4, the
system considers all digits received.
Type 1: The system passes the received
digits from the single line telephone to the
trunk immediately. If the single line
telephone has a Last Number Dial key
without a pause, this key may not be able
to use the Last Number Dial key with the
Type 1 setting.
When using a third-party external paging
device, set this option to 1. In addition, set
Program 20-03-04 to 1. These programs must
be set for Wireless – DECT users to be able
to break dial tone on an analog trunk that is
used for paging.
UNIVERGE SV8100
Input Data Default
0 = Hookflash
(Hooking)
1 = Hookflash +
Service
Code 654
0 = Do Not
Ignore (No)
1 = Ignore (Yes)
0 = Receive all
dialed data,
before
sending (All)
1 = Direct
through out
(Direct)
Program 20 : System Option Setup
Related
Program
0 11-12-47
0 15-03-01
0 20-03-04