Table of Contents
Advertisement
18
16
Media Select switch (Left: +, Right: –)
The Media Select switch is provided to select the slot to connect with the floppy disk drive and
CD-ROM drive at the front the blade assembly unit, or the USB device connected to the USB
connector.
The Media Select lamp of the selected slot goes on.
Pressing the plus (+) button at the left side selects the slot one by one in ascending order
(#1 →#2→#3→#4→#5→#6→#1).
Pressing the minus (–) button at the right side selects the slot one by one in descending order
(#6→#5→#4→#3→#2→#1→#6).
17
Serial Select switch (Left: +, Right: –)
The Serial Select switch is provided to select the slot to connect with the serial device
connected to the serial port at the front the blade assembly unit.
The Serial Select lamp of the selected slot goes on.
Pressing the plus (+) button at the left side selects the slot one by one in ascending order (#1
→#2→#3→#4→#5→#6→#1).
Pressing the minus (–) button at the right side selects the slot one by one in descending order
(#6→#5→#4→#3→#2→#1→#6).
18
POWER lamp (Green)
See the previous page.
19
Chassis sensor lamp (Green/Amber)
See the previous page.
20
ID lamp (Blue)
See the previous page.
21
Chassis ID switch
Use this switch to set the ID specific to the chassis.
22
ICMB connector
See the previous page.
Advertisement
Table of Contents
