Table of Contents
Advertisement
System Configuration Setup
On Board Devices
Specifies the settings for SCSI and LAN devices.
Installed O/S
If Windows 2000 is installed on the server, select "Win2000"; otherwise, select
"Other".
Reset Configuration Data
Don't change this setting.
Large Disk Access Mode
Change only if you understand what will result.
Local Bus IDE Adapter
Specifies whether the IDE controller is enabled or disabled.
PS/2 Mouse
Select "Auto Detect".
Multiprocessor Specifications
Set the multiprocessor specifications to 1.4.
Summary Screen
Specifies whether the POST summary information is enabled or disabled. Select
"Disabled".
USB BIOS Legacy Support
Specifies whether USB devices are recognized as Legacy devices allowing you to
use a USB keyboard or mouse as a PS/2 keyboard or mouse.
Security menu
This section describes the security settings available in the BIOS Setup Utility.
All are recommended settings.
Set User Password
Set Supervisor Password
Password on Boot:
Diskette access:
[Enter]
[Enter]
[Disabled]
[Supervisor]
BIOS Setup Utility
:DOS
103
Advertisement
Table of Contents
