Table of Contents
Advertisement
Server Setup Tool
The following drivers were detected for this server. Add, change,
or delete device drivers as needed.
Device types
Platform Support Module:
HotPlug Support Module:
Storage adapters
1
Move the cursor to "Storage adapters" using the arrow keys, and press the Enter
key.
2
Insert the Symbios NetWare Driver floppy disk created with the Toshiba Server
Setup Tool in the floppy disk drive.
3
Select Add an unlisted driver <Ins> by pressing the Insert key twice.
4
Press the Enter key to install the drivers. The following drivers are added to the
screen (two drivers are added because the Onboard SCSI has two channels.)
| | SYM_U3NW.HAM | | LSI Logic 53C1010
| | SYM_U3NW.HAM | | LSI Logic 53C1010
Continue the installation by following the on-screen instructions.
Selecting the RAID Controller driver
After selecting the Onboard SCSI Controller driver, select the RAID controller driver as
follows:
1
Insert the NetWare Driver floppy disk (which comes with your RAID controller), in the
floppy disk drive.
2
Press the Insert key twice to select the Add an unlisted driver <Ins>.
3
Press the Enter key to copy the drivers on the floppy disk.
The drivers are added to the "List of drivers currently selected," (since the Onboard
SCSI Controller has two channels, the two drivers are selected.)
| | MEGA4_xx.HAM | | AMI MegaRAID Enterprise 1600/1700 Express
500 Adap
Continue the installation by following the on-screen instructions.
Driver names
MPS14
(optional)
IDEATA
options
_Continue
_Modify
| |
| |
| |
170
Starting SST
Advertisement
Table of Contents
