Table of Contents
Advertisement
Server Setup Tool
Setup of the RAID Controller Utility
If the RAID controller is connected to the server, be sure to set up the "MegaRAID
Manager" that is a RAID Controller Utility after installing NetWare. If the MegaRAID
Manager is not set up, the system cannot be recovered from a disk error during
operation.
Additional Software Manual Installations
This section reviews additional software manual installations.
HarnessEye/web
When Windows 2000 / Windows NT Server 4.0 is installed using the Server Setup Tool,
the Agent function of the HarnessEye/web can be automatically installed.
To manually install the HarnessEye/web, or to install the Management Console function
or the Management Proxy function from the SST CD-ROM, follow the procedure below
after installing Windows 2000/Windows NT Server 4.0.
1
Start Windows 2000/Windows NT Server 4.0 and log on as the Administrator (or a
user having equivalent rights).
2
Insert the SST CD-ROM.
3
Open the command prompt.
4
Change the current directory to the following:
<CD-ROM>\PUBLIC\UTILS\TOSHIBA\HEYE
5
Enter the following command:
SETUP
For more information on the HarnessEye/web installation, refer to the HarnessEye/web
User's Guide.
Toshiba Display Power Save Driver
The Toshiba Display Power Save Driver is a device driver for Windows 2000 that controls
the monitor's power-saving function. After selecting Install Windows 2000 in the SST
procedure, the driver will be automatically installed.
To manually install the driver from the SST CD-ROM, follow the procedure below after
installing the Windows 2000:
1
Log onto Windows 2000 as the Administrator (or a user having equivalent rights).
2
Insert the SST CD-ROM.
Additional Software Manual Installations
172
Advertisement
Table of Contents
