Table of Contents
Advertisement
Management Software
Item
Spinup Delay
Spinup Count
Scan Channels
Logical
Index
Status
Size In MB
Raid Level
Stripe Size
Read Policy
Write Policy
Cache Policy
Number Of Spans
Number Of Stripes
Check Consistency
or Initialize
Physical
Channel
Index
Status
Array Position
Size in MB
Device Type
Inquiry String
SCSI Level
Que Depth
Rebuild Progress
Medium Errors
Slot Status
Slot Number
Other Errors
If you use this method for displaying SCSI RAID information, install the SNMP agent
using the SCSI RAID utility.
Displays the spin-up delay.
Displays the spin-up count.
Displays the number of scan channels.
Displays information on the logical drive.
Displays the index number of the array's logical drive .
Displays the status of the logical drive.
Displays the capacity of the logical drive.
Displays the RAID level.
Displays the stripe size.
Displays the read policy.
Displays the write policy.
Displays the cache policy.
Displays the number of arrays spanned by this logical drive.
Displays the number of stripes.
Displays the progress of consistency checking or initialization,
depending on the status of this logical drive.
[For example, "Check Consistency" (4) or "Initialize" (3).]
Displays information on the physical drive.
Displays the adapter channel number that the disk is
connected to.
Displays the number of the physical drive.
Displays the status of the physical drive.
Displays the array position.
Displays the capacity of the physical drive in megabytes.
Displays the device type.
Displays the SCSI inquiry character string.
Displays the SCSI level.
Displays the maximum number of this device que.
Displays the rebuild progress.
Displays the number of device medium errors.
Displays the status of the slot.
Displays the number of the slot.
Displays the number of errors other than device medium
errors.
Explanation
199
Using HarnessEye/web
Advertisement
Table of Contents
